|Shell||Chromium-molybdenum steel Seamless shell, designed and manufactured to ASME VIII Div 1 U stamped|
|Working Pressure||207, 276, 345, 420 and 459 Bar|
|Accumulator Capacity||0.16 L Nominal|
|Temperature Range||-20 to 100 Degree C|
All our accumulator shells are pressure tested. An additional hydro-pneumatic pressure test on the complete accumulator can be undertaken with or without a specific inspection authority as an optional extra.
Material Certification: Available on request for all major pressure loaded parts.
Finish: One Coat Primer paint as standard. Special paints available.
Bladder: Totally enclosed construction with an extensive range of elastomers available.
Fluid port assembly: Integral high-flow port and poppet valve assembly with an anti-extrusion ring.
Safety: All gas-loaded accumulators are pressurised vessels and it is recommended that safety consideration be given to the applications in which they are used. A relief valve should always be fitted to the hydraulic system with the option of a burst disc to protect the accumulator. If there is a fire risk in the vicinity of the accumulator then a fusible/eutectic plug should be fitted.
|Volume||0.075 to 3.5 Litres|
|Pressure||100 to 350 ba|
|Max Temp||- 10/+80 Degree C|
|Material||Steel Casing, Nitrile Diaphragm|
Reviewed by 13 Users
Most Relevant Reviews